How to Check If Raspberry Pi Camera is Working

If you’ve just plugged in your Raspberry Pi Camera and are wondering if it’s working, here’s how to check. First, make sure the camera is enabled in the Raspberry Pi configuration tool by running `sudo raspi-config`. Select `Interfacing Options`, then `Camera`.

You should now see `Enabled` next to `Camera`. If not, select it and press enter to enable the camera. Now that the camera is enabled, we can test it with the `raspistill` command.

This will take a still image with the default settings and save it as a JPEG file called `cam.jpg` in your current directory. Run the command like this: `raspistill -o cam.jpg`

You should now have a file called cam.jpg in your current directory which you can view to confirm that your camera is working as expected!

  • Power on your Raspberry Pi and open the Terminal
  • Type in the following command to install the fswebcam package: Sudo apt-get install fswebcam 3
  • Once the installation is complete, type in the following command to take a picture using the webcam: fswebcam -r 640×480 image
  • jpg 4
  • This will take a picture with a resolution of 640×480 and save it as an image
  • jpg in your current directory
  • You can view the image by opening it up in any image viewing program such as GIMP or Photoshop
  • To check if the camera is working properly, you can also try taking a video by typing in the following command: fswebcam -r 1280×720 video
  • avi This will take a video with a resolution of 1280×720 and save it as a video

How Do I Test My Raspberry Pi Camera?

Assuming you would like a step-by-step guide on how to test your Raspberry Pi camera once it is set up:

  1. Make sure the camera is properly connected to the Pi board. If using the official Raspberry Pi Camera Module, connect it to the dedicated CSI port as shown in the illustration below. If using another type of camera, consult its documentation for proper connection instructions.
  2. Open the Terminal and enter “sudo raspi-config”. Use the arrow keys to navigate to “Interfacing Options” and press Enter.
  3. Select “Camera” and press Enter. Choose “Yes” when asked if you want to enable the camera interface and press Enter again to confirm your selection then Exit raspi-config .
  4. Install fswebcam by entering Sudo apt install fswebcam into Terminal.

    This program will be used to take still images with our webcam later on in this process.
  5. a). To use USB webcams instead of the official RPI Cam, please refer point
    b) onwards else go ahead with a point
  6. We need additional software for that which can be installed by running the following commands one after another: sudo modprobe bcm2835-v4l2 //This command makes pi detect USB webcams vcgencmd get_camera //This command tells whether the USB host is enabled or not

If the output says “supported=1 detected=1”, it means that everything’s fine till now & we are good to go ahead with the next step else run the following two commands & repeat step 5a) again: Sudo echo ‘#dtoverlay=vc4-fkms-v3d’ >> /boot/config.txt Sudo reboot //After running this 2nd command, the system reboots & enables driver by default(No need of vcgencmd get_camera command now) 5b). Now open the terminal window & type ls -ltr /dev/video*. You should see the video0 device file there which means our USB webcam has been successfully detected by the system.

Why is My Camera Not Working on Raspberry Pi?

If you’re having trouble getting your camera to work on your Raspberry Pi, there are a few things you can try. First, make sure that the camera is properly connected to the Pi. If it’s not, then the problem is most likely with the connection and not the camera itself.

Next, check to see if the camera is enabled in the Raspberry Pi settings. To do this, open up the Preferences window from the main menu and click on “Raspberry Pi Configuration.” In the Interfaces tab, make sure that “Camera” is set to “Enabled.”

If those two things are fine and you’re still having trouble getting your camera to work, then it’s possible that there’s a problem with the drivers. You can try updating them by running Sudo apt-get update & Sudo apt-get upgrade from the command line. That will update all of your installed packages, including any drivers that might be causing problems.

Finally, if nothing else has worked, then it’s possible that there’s a hardware issue with your camera module. You can try replacing it with another one to see if that fixes the problem.

How Do I Enable My Camera on Raspberry Pi?

If you’re using a Raspberry Pi Camera Module, you need to enable the camera in the Raspberry Pi configuration tool before you can use it. To do this, open the Configuration Tool from the Preferences menu. Go to Interfaces and select Enabled beside the Camera option.

For more detailed instructions on how to do this, check out our tutorial on How to Enable Your Camera in Raspbian.

How Do I Know If My Raspberry Pi Is Working?

When you plug in your Raspberry Pi, you should see a green LED on the board light up. If this doesn’t happen, then it’s likely that your Raspberry Pi is not working. If the green LED does come on, then you can check if your Raspberry Pi is working by trying to access it via SSH.

To do this, you’ll need to know the IP address of your Raspberry Pi. You can find this by running the command ‘ifconfig’ from the terminal. Once you have the IP address, you can try to SSH into your Raspberry Pi using a program like PuTTY.

If all of these steps fail, then it’s likely that there is something wrong with your hardware. Try checking all of your cables and connections to make sure they are secure and correctly plugged in. You could also try using a different power supply or SD card.

Raspberry Pi Camera Not Detected

If you’ve recently installed a Raspberry Pi Camera and found that it’s not detected by your system, don’t despair! This is a common problem that can be easily fixed. There are two main reasons why your camera might not be detected: either the wrong driver is installed, or there’s a hardware issue.

Let’s take a look at each of these in turn. The first thing to check is whether you have the right driver installed. The Raspberry Pi Camera uses the Motion-JPEG format, which is not supported by the standard Raspbian kernel.

You’ll need to install the bcm2835-v4l2 driver to get things working. You can do this using the following command: Sudo modprobe bcm2835-v4l2

Once this is done, restart your Raspberry Pi and try accessing the camera again. If it still doesn’t work, then there may be a hardware issue with your camera module. Try swapping it out for a new one and see if that makes any difference.


If you’re working with a Raspberry Pi Camera and want to know if it’s functioning properly, there are a few ways to check. The first is to simply take a picture or video with the camera and see if it comes out clear. If not, then there may be an issue with the camera itself.

Another way to check is to use the command line tool “raspistill” which lets you take still images with the camera. If this works, then your camera is likely working fine. Finally, you can also check the system log for any errors that might be related to the camera not working properly.

Editor - An aspiring Web Entrepreneur, Professional Blogger for over 9 years, SEO Specialist, Digital Marketing Expert, and avid Tech Geek. He loves to cover topics related to iOS, Tech News, and the latest tricks and tips floating over the Internet.