How to Clean Dirt from iPhone Speakers

To clean your iPhone’s speaker, start by removing any dirt or debris that may be blocking it. Then, use a soft, dry cloth to wipe down the speaker. If you need to, you can use a cotton swab dipped in rubbing alcohol to remove any stubborn dirt.

Be sure to avoid getting water or other liquids inside the speaker; if this happens, you’ll need to take your iPhone to an authorized service provider for repairs.

  • First, you will need to gather your supplies
  • You will need a can of compressed air, a soft cloth, and a toothbrush
  • Next, you will want to hold the can of compressed air about an inch away from the speaker grille and give it a few short bursts of air
  • Be sure to hold the can upright so that the air does not blow directly into the speaker itself
  • After you have given the speaker grille a few blasts of air, take your soft cloth and gently wipe away any dirt or dust that has been loosened up
  • Finally, use your toothbrush to gently scrub away any stubborn dirt or debris that is clinging to the speaker grille
  • Be sure to use gentle strokes so as not to damage the delicate speakers beneath

How Do You Get Dirt Out of Phone Speaker Holes?

If your phone is anything like mine, the speaker holes tend to get clogged with dirt and lint pretty easily. Here are a few tips on how to clean them out:

1. Use a small, soft-bristled brush to gently remove any debris from the speaker holes.

A toothbrush or Q-tip can work well for this.

2. If there is any build-up of dirt or grime, you can try using a cotton swab dipped in rubbing alcohol to clean it off.

3. Another option is to use compressed air to blow out any dirt or lint that may be stuck in the speaker holes.

4. Finally, if your speaker holes are still clogged after trying all of the above, you can try using a needle or other sharp object to carefully remove the debris. However, be very careful not to damage the speaker itself!

How Do I Clean a Muffled Iphone Speaker?

If you can’t hear audio from your iPhone’s speaker, or the sound is muffled, there are a few things you can try to clean and unclog your phone’s speaker! Make sure to follow these steps carefully so you don’t damage your phone.

1. Use a soft-bristled toothbrush to gently brush away any debris that might be blocking the speaker grille.

You can also use a cotton swab for this step.

2. If there appears to be water damage, blow into the speaker grille until you see moisture come out of the other side. This will help remove any water that’s gotten inside the phone and is causing interference with the sound.

3. Take a look at your iPhone’s earpiece to make sure it isn’t clogged with dirt or dust. If it is, use a soft cloth to wipe it clean.

4. Restart your iPhone by holding down the power button until “Slide to Power Off” appears on the screen.

Then, turn your phone back on by holding down the power button again.

5. Try playing some audio on your iPhone to see if these steps have helped improve sound quality!

Cleaning iPhone Speaker With Alcohol

If your iPhone’s speaker isn’t working as well as it used to, there’s a good chance that it’s just dirty. Over time, dust and other particles can build up on the speaker grille and impede sound quality. But don’t worry, cleaning your iPhone’s speaker is easy to do and only takes a few seconds.

To clean your iPhone’s speaker, you’ll need: – A cotton swab or soft cloth – Isopropyl alcohol (70% or higher)

– A clean, dry cloth for wiping away any residue Start by lightly dampening the cotton swab or soft cloth with isopropyl alcohol. Then gently wipe the speaker grille in a circular motion.

Be sure not to apply too much pressure, as you don’t want to damage the delicate speakers. Once you’ve wiped away all of the dirt and debris, use the clean, dry cloth to remove any residual alcohol. And that’s it!

Your iPhone’s speakers should now be nice and clean.


iPhone speakers can get really dirty, really quickly. But there are a few easy ways to clean them and make them look new again! Just use a little soap and water on a soft cloth, or use a cotton swab dipped in alcohol.

Be careful not to damage the speaker by using too much pressure. And that’s it! Your iPhone speakers will be good as new in no time.

Thohidul Alam is a Web Developer by profession and Content Writer by passion. He loves to write about gaming and technology guides. When he is not writing, he must be developing something!