Firstly, remove your iPhone from any case or screen protector. Secondly, using a soft-bristled brush, gently scrub the speaker mesh in a circular motion. To clean the inside of the speaker openings, use a cotton swab dipped in isopropyl alcohol.
- Turn off your iPhone and remove the SIM card tray
- Use a can of compressed air to blow into the speaker openings on the bottom of your iPhone
- Use a lint-free cloth to wipe away any water that may have collected on the outside of the speaker grille
- Allow your iPhone to dry completely before reassembling it
How to Remove Water from iPhone Speaker?
Q: How Do I Clean Water Out of My Iphone Speakers
If your iPhone has gotten wet, the first thing you should do is turn it off to prevent any further damage. Then, remove the SIM card and any other external parts that may have gotten wet. Next, use a soft, absorbent cloth to wipe down the outside of the phone.
If you can see water inside the phone, use a vacuum cleaner with the hose attachment to suck it out. Once you’ve removed as much water as possible, place your iPhone in a dry, airtight container filled with rice or silica gel packets and leave it overnight. In the morning, check to see if your phone turns on and if the speakers are working properly.
If they’re not, take your phone to an authorized Apple repair center for further assistance.
If You See Any Water Inside the Speaker Grille, Use a Can of Compressed Air to Blow It Out
If you see water inside the speaker grille, it’s important to blow it out as soon as possible. Water can cause serious damage to your speaker and will shorten its lifespan. A can of compressed air is the best way to get rid of any water inside the speaker grille.
Simply point the can towards the grille and give it a few short bursts. The water should be blown out quickly and easily. If you don’t have a can of compressed air, you can try using a hairdryer on its lowest setting.
Just be careful not to overheat the speaker grille or damage the speaker itself.
To Dry the Inside of the Speaker, Insert a Small Piece of Absorbent Material (Such As a Cotton Swab) into the Port
If your speaker has been exposed to moisture, it’s important to dry the inside of the speaker as soon as possible. Moisture can cause damage to the speaker and lead to poor sound quality. To dry the inside of the speaker, insert a small piece of absorbent material (such as a cotton swab) into the port.
Be sure to move the absorbent material around so that it absorbs any moisture inside the speaker. Once you’re finished, make sure there is no moisture visible on the outside of the speaker before using it again.
Gently Move It around to Soak Up Any Moisture
When you spill a liquid on your clothing, the first thing you should do is gently move the fabric around to soak up as much of the moisture as possible. If the area is large or if the fabric is particularly absorbent, you may need to blot it with a clean towel to remove all of the liquid. Once you’ve soaked up as much liquid as possible, you can proceed with washing the garment according to its care instructions.
In most cases, simply tossing it in the washing machine will suffice. However, if the stain is particularly stubborn or if your garment is delicate, you may need to pretreat it with a stain remover before laundering.
How to Get Water Out of Iphone Speaker Shortcut
We all know how frustrating it is when our phones get wet. Whether it’s from rain, sweat, or an accidental drop in the toilet, water and phones don’t mix. And one of the most annoying things that can happen when your phone gets wet is water getting trapped in the speaker.
This can lead to muffled sound, crackling, or even complete loss of audio. But there’s no need to panic! There are a few simple steps you can take to try and remove the water from your speaker and get your audio back up and running.
The first thing you’ll want to do is turn off your phone and remove the SIM card (if possible). This will help prevent any further damage to your phone from the water. Once your phone is turned off, gently tilt it so that the bottom of the phone is facing upwards.
Then use a vacuum cleaner with the hose attachment to suck out any water that may be trapped in the speaker grille. You can also try using compressed air to blow out any remaining water droplets.
Once you’ve removed as much water as possible from the outside of your phone, it’s time to focus on drying out the inside.
The best way to do this is by placing your phone in a container of uncooked rice. The rice will absorb moisture from your phone overnight, helping to dry out any residual water inside of it. In the morning, check your phone for signs of condensation or moisture; if everything looks good, give it a try and see if your audio quality has improved!
Conclusion
Use a can of compressed air to blow any water out of the speaker grilles. If you don’t have a can of compressed air, you can try using a hairdryer on the lowest heat setting. Be sure to hold the hairdryer at least six inches away from your iPhone to avoid damaging it with too much heat.
Use a soft, lint-free cloth to wipe any remaining water off of the speaker grilles. Avoid using paper towels or anything else that could leave behind lint or other debris.
