To factory reset your Smartthings Hub, go to the device settings in the app and scroll down to find the reset option. Tap on “Factory Reset” and confirm. This will erase all data from your hub and return it to its default settings.
- The first step is to log into the SmartThings app and go to the dashboard
- Click on the Hub that you want to reset and then click on the settings cog in the top right corner
- Scroll down to the bottom of the page and click on “Remove Hub“
- The next step is to unplug your hub from power and Ethernet
- Once it is unplugged, press and hold the factory reset button for 30 seconds
- After 30 seconds, plug your hub back in and wait for it to boot up
- Once your hub has booted up, it will be in factory reset mode
- You will need to set up your hub again from scratch by adding devices and creating rules/automation
How Do I Reset My Samsung Home Hub?
If you need to reset your Samsung Home Hub, there are a few different ways to do it. Here’s how: 1. If your Home Hub is unresponsive or frozen, you can try a hard reset by holding down the power button for 10 seconds.
This will force the device to restart. 2. If you want to reset your Home Hub without losing any of your data or settings, you can do a factory reset through the Settings menu. To access the Settings menu, tap the three dots in the top right corner of the screen and select “Settings.”
Then, scroll down and tap “About device.” At the bottom of this page, you’ll see an option to “Reset device.” Select this and confirm that you want to proceed with the reset.
3. Finally, if you want to completely remove all data from your Home Hub before selling it or giving it away, you can perform a full factory data reset. This will erase everything from the device, so be sure that you have backups of any important data before proceeding. To do a full factory data reset, go into the Settings menu and select “Backup & reset.”
At the top of this page, there will be an option for “Factory data reset.” Select this and confirm that you want to proceed with the reset.
How Do I Transfer Smartthings to New Owner?
Assuming you would like tips on how to properly transfer your SmartThings account to a new owner: The first thing you’ll want to do is add the new owner as a user in your SmartThings app. To do this, go to the My Home tab, tap on the three dots in the top right corner, and select Add User.
The new user will then need to accept the invitation in their own SmartThings app. Once the new user has been added, you can begin transferring ownership of your devices and automation. To do this for each device, go to the device’s settings page and scroll down to find the Transfer Ownership option.
For automation, open up the automation’s settings page and tap on Transfer Automation under the Owner section. After all of your devices and automation have been transferred, you can finally remove yourself as a user from the account by going to My Home > Tap on the 3 dots in the top right corner > Manage Users > Select yourself > Remove User.
How Do I Connect My Smartthings Hub to a New Wifi?
If you’re looking to connect your SmartThings hub to a new Wi-Fi network, there are a few things you’ll need to do. First, make sure that your hub is updated to the latest firmware. To do this, open the SmartThings app on your mobile device and navigate to the Devices tab.
Then, select your hub and tap the update icon in the top right corner of the screen. Once your hub is updated, open the Settings menu and select Networking. Here, you’ll see an option for Connected Hubs.
Tap this and then select Add Hub. Enter your Wi-Fi SSID and password when prompted and then tap Done. Your SmartThings hub will now be connected to your new Wi-Fi network!
How Do I Refresh Smartthings Hub?
If your SmartThings hub is not working as it should, you can try refreshing it. To do this, follow these steps:
1. Press and hold the reset button on the back of your hub for 10 seconds.
2. Release the reset button and wait a few minutes for your hub to restart.
3. Once your hub has restarted, open the SmartThings app and check that all of your devices are showing up and working as they should.
4. If you’re still having issues with your hub or devices, you can try factory resetting your hub.
Note that this will delete all of your device settings and data, so only do this as a last resort.
How to Reset Smartthings Hub V3
If you need to reset your Smartthings Hub V3, here’s how:
1. First, unplug the power cord from the back of the hub.
2. Next, press and hold the recessed button on the back of the hub for about 15 seconds.
You’ll know the reset is successful when the LED light on the front of the hub turns solid green.
3. Finally, plug the power cord back in to complete the reset process.
Conclusion
If you need to factory reset your SmartThings hub, here’s how:
1. First, delete all of your devices and scenes in the SmartThings app.
2. Next, go to the settings cog in the top-right corner of the Dashboard and select “Remove Location”.
3. Confirm that you want to remove the location by selecting “Remove“.
4. Once the location has been removed, select “Add Location” and follow the instructions to create a new one.
5. Now that you’ve created a new location, you can add your devices and scenes back into it.
