To factory reset your Sonos 5, follow these steps:
1. From the app, go to Settings > System > Advanced and scroll down to the bottom.
2. Select Factory Reset and then choose Yes to confirm.
3. Once the reset is complete, all your settings will be reverted back to their defaults and your speaker will reboot itself.
- Check if your Sonos 5 is connected to the power supply and ensure that it is turned on
- Press and hold the “Mute” button for 10 seconds
- All LEDs on the speaker will light up and then turn off, indicating that the speaker has been reset to factory settings
How Do I Reset My Play 5 Gen 2?
If you’re looking to reset your Play:5 Gen 2, there are a few things you’ll need to do. First, make sure that the power cord is unplugged from the speaker. Next, press and hold down the Mute button and the Volume up button simultaneously for 10 seconds.
After 10 seconds have passed, release both buttons and then press and hold down just the Volume up button for an additional 10 seconds. Once those 10 seconds have elapsed, your speaker should be reset and ready to go!
How to Do a Factory Reset on Sonos?
If your Sonos system isn’t working as it should, a factory reset may be the best way to get it back up and running. Here’s how to do a factory reset on Sonos:
1. From the app, go to Settings > System > Advanced Settings.
2. Tap Reset Factory Defaults and then confirm by tapping Yes, Reset Factory Defaults.
3. All your settings will be reverted to their defaults and all your content will be deleted from the system.
How Do I Factory Reset My Play 5 Gen 1?
If your Play:5 (gen1) is unresponsive, or you want to clear all content from the speaker and start fresh, you can restore it to factory default settings. To do this:
1. Make sure your speaker is powered off.
2. Press and hold the Mute button while you power on the speaker.
3. Continue holding the Mute button until the light ring turns orange (approximately 8 seconds). You’ll hear an audible tone when the reset begins.
4. When the light ring turns white again, release the Mute button. The reset is now complete and your speaker will restart automatically.
How Do I Reset Sonos for New Owner?
If you’re looking to reset your Sonos system so that a new owner can enjoy it, there are a few things you’ll need to do. First, you’ll need to factory reset each individual speaker. To do this, press and hold the mute button on the speaker for 6 seconds.
The light on the speaker will turn red, indicating that it’s been reset. Once all of your speakers have been reset, you’ll need to delete them from your Sonos account. To do this, log into your Sonos account and go to the settings page.
Under “speakers,” select “delete.” This will remove all of your speakers from your account so that a new owner can set them up with their own account information. Finally, you’ll need to unplug the power cord from the router and disconnect any Ethernet cables that are connected to the system.
Once everything has been disconnected, your Sonos system will be ready for a new owner!
Factory Reset Sonos 5 (Gen 1)
If you’re looking to factory reset your Sonos 5 (Gen 1), there are a few things you’ll need to do. First, make sure that your Sonos 5 is connected to the power supply and turned on. Then, press and hold the “Mute” button for 10 seconds.
Once the LED indicator light starts flashing white, release the button and wait for the Sonos 5 to restart. Once your Sonos 5 has restarted, it will be in factory reset mode and all of your settings will have been erased. To complete the factory reset process, simply select “Set up a new system” from the menu on your Sonos app and follow the prompts.
Conclusion
If you’re looking to factory reset your Sonos 5, there are a few steps you’ll need to follow. First, make sure that your Sonos 5 is disconnected from any power source. Next, locate the “Reset” button on the back of the device.
Once you’ve found the button, press and hold it for 10 seconds. After 10 seconds have passed, release the button and wait for the Sonos 5 to restart. Once it has restarted, your Sonos 5 will be reset to its factory settings.
