How to Factory Reset Synology Nas

1. Power off your Synology NAS.

2. Press and hold the reset button for 3 seconds.

3. Turn on your Synology NAS and wait for DSM to load.

4. Once DSM has loaded, go to “Control Panel” > “All settings”.

5. Select the “DSM Settings” tab at the top and scroll down to find the “Reset button” section near the bottom of the page.

6. Click on the radio button next to “Clear all data on this volume“.

7. A warning message will appear asking you to confirm that you want to erase all data; click Yes if you are sure that you want to proceed with erasing all data (this cannot be undone).

8. Click Ok once the process is complete; your Synology NAS will now have been reset back to its factory default settings!

  • Back up your data: Before you reset your Synology NAS, you should back up any data you want to keep
  • Connect to your Synology NAS via SSH: Once you have backed up your data, you will need to connect to your Synology NAS via SSH
  • Enter the following command: After connecting to your Synology NAS via SSH, enter the following command: 4
  • Wait for the process to complete: The process of resetting your Synology NAS will take a few minutes
  • Once it is completed, you will be able to access your Synology NAS with the default username and password

How Do I Wipe And Reset My Synology Nas?

If you’re looking to wipe and reset your Synology NAS, there are a few different ways you can go about it. In this blog post, we’ll outline the different methods for doing so and provide some guidance on which method may be best for you. One way to reset your Synology NAS is to use the “Reset button” feature.

To do this, simply press and hold the reset button on your NAS for 4 seconds. This will initiate a factory reset of your device, returning it to its default settings. Another way to reset your Synology NAS is through the web-based interface.

To do this, log into the web-based interface and navigate to the “Control Panel.” From here, select “General Settings,” then scroll down and click on “Restore Defaults.” This will also initiate a factory reset of your device.

Finally, you can also reset your Synology NAS by connecting it to a computer via SSH and running the following command: syno_poweroff -r -f -d 0 This command will force a reboot of your NAS and initiate a factory reset.

Note that this method will only work if you have SSH enabled on your NAS. If you’re not sure how to do this, please consult your Synology documentation.

How Do I Delete All Data from Synology?

When you want to delete all data from your Synology device, there are a few different ways that you can go about doing this. One way is to simply format the entire drive, which will erase all data and leave you with a blank slate. Another way is to use the “Delete All” function in the DSM (DiskStation Manager) software, which will delete all data except for any protected files.

Finally, if you have a file or folder that you want to specifically delete, you can do so by selecting it and then pressing the “delete” key.

Does Synology Reset Wipe Data?

When you reset your Synology NAS, it will wipe all of the data on the device. This is done in order to protect your data and ensure that it is not lost if something goes wrong with the NAS. If you want to keep any of the data on your NAS, you will need to back it up before resetting.

Where is the Reset Button on Synology?

If you need to reset your Synology device, there are a few different ways to do it. The first is by using the reset button on the back of the unit. This will return all settings to their defaults and will erase any data that is stored on the device.

If you do not want to lose any data, you can choose to reset the unit through the web-based interface or by using the DSM software. To reset your Synology device through the web-based interface:

1. Log into DSM with your administrator account.

2. Go to Control Panel > System > Hardware & Power.

3. Click on the “Reset button” and follow the instructions given.

4. Once complete, reboot your Synology device for the changes to take effect.

 Alternatively, if you have DSM installed on your computer, you can use it to reset your Synology device as well:

1. Open DSM and log in with your administrator account.

2. Go to the Main Menu and click on “Control Panel”.

3. In Control Panel, go to the “System” section and click on “Hardware & Power”.

4. Click on the “Reset button” and follow the instructions given. Once complete, reboot your Synology device for the changes to take effect.

Reset Synology Nas Dsm 7

If you’re looking to reset your Synology NAS DSM 7, there are a few things you’ll need to do. First, make sure that you have a backup of all your data. Next, log into the DSM and go to “Control Panel.”

From here, select “General Settings.” Scroll down to the bottom of the page and click on “Clear Configuration.” Confirm that you want to clear the configuration by clicking on “Yes.”

Once this is done, your Synology NAS will be reset and ready to reconfigure.

Conclusion

If you’re looking to reset your Synology NAS, there are a few different ways to do it. In this blog post, we’ll walk you through the different methods and what to expect from each one. The first method is to use the web interface.

To do this, simply log into your Synology NAS and go to the Control Panel. From here, select ” DSM Settings” and then click on “Storage Manager.” From Storage Manager, select the disk that you want to reset and then click on the “Format” button.

This will erase all of the data on the disk and return it to its factory default settings. The second method is to use SSH. To do this, you’ll need to connect to your Synology NAS using an SSH client like PuTTY.

Once connected, run the following command: syno_poweroff -d 1 -r 0 This will initiate a hard reboot of your Synology NAS and will reset it back to its factory defaults. Finally, you can also use the physical reset button on your Synology NAS. This button is usually located on the back of the device near the power connection.

Pressing and holding this button for 10 seconds will initiate a factory reset as well.

Raymond Williams is a technology writer that lived with computers all his life. He is an expert character that writes articles about Windows, Gaming, Android, and How To Fixes.