How to Fix Samsung 65 Inch TV Remote?

If your Samsung 65-inch TV remote isn’t working, there are a few things you can try to fix it. First, check the batteries and make sure they’re properly inserted. If that doesn’t work, try resetting the remote by holding down the power button for five seconds.

If neither of those solutions works, you may need to contact Samsung customer service for further assistance.

  • Check the batteries in the remote control to ensure that they are properly seated and have enough charge
  • If the batteries are fine, try resetting the remote by removing them and then reinserting them after a few seconds
  • Another way to reset the remote is to press and hold the power button for five seconds
  • If these methods do not work, check if there are any obstructions between the remote and TV that could be interfering with the signal such as curtains or other electronics
  • You can also try reprogramming the remote by following these steps: 6
  • Press and hold down the SETUP button until the red light on your remote blinks twice 7
  • Enter 9-9-1 using your number pad on your remote 8
  • Find your TV brand code from this list: http://www
  • Samsung supports
  • com/en/TVs/model/BN59-01259B?subsubtype=tv&pagetype=model#!/tab_Content3/pv_content%3Dco_reliability%26cq_conid%3DCRQF1006031700018%26cq_creatorid%3D20C294EA55E74EE09149A75AA86F93DF%26cq_createdate%3DMAR102017%26cq_publishdate%3DMAR102017 (For example, Samsung’s code is “01”) 9
  • Enter your four-digit TV brand code using your number pad 10
  • The red light will blink twice to confirm that it has been successfully programmed

How Do I Reset My Samsung TV Remote?

If your Samsung TV remote isn’t working, you can try resetting it. To do this, first, remove the batteries from the remote. Then, press and hold the “Power” button on the remote for 5 seconds.

This will reset the remote and hopefully fix any issues you were having.

Why is My Remote Not Working Even With New Batteries?

There are a few reasons why your remote might not be working, even with new batteries. One possibility is that there’s something wrong with the circuitry inside the remote. Another possibility is that the batteries aren’t making good contact with the terminals inside the remote.

If you’ve tried new batteries and the remote still isn’t working, you can try cleaning the battery terminals with a cotton swab dipped in vinegar. If that doesn’t work, you’ll need to take the remote to an electronics repair shop for further diagnosis.

Why is My Samsung Remote Acting Weird?

If your Samsung remote is behaving oddly, there are a few potential explanations. Perhaps the batteries are running low and need to be replaced. It’s also possible that the remote is dirty or dusty, which can interfere with its performance.

If you’ve recently made changes to your TV’s settings, that could also be causing problems. In any case, it’s usually fairly easy to fix issues with a Samsung remote.

Why Do Some Buttons on My Samsung Remote Not Work?

There are a few reasons why some buttons on your Samsung remote may not be working. Here are a few possibilities:

  1. The batteries in the remote may be running low and need to be replaced.
  2. There may be something blocking the infrared sensor on the remote, preventing it from receiving signals from the TV. Make sure there is nothing obstructing the sensor, such as a piece of furniture or curtains.
  3. If you have multiple devices connected to your TVs, such as a Blu-ray player or sound system, make sure that they are all turned on and set to the correct input. The remote will only control devices that are powered on and set to the right input.
  4. If none of the above solutions work, try resetting your TV to its factory settings. This will erase all custom settings and return the TV to its default state.

To do this, go into your TV’s menu and navigate to the “Support” section. From there, select “Self Diagnosis” and then “Reset”.

Samsung Smart TV Remote: Button Functions

If you have a Samsung Smart TV, you may be wondering what all the buttons on the remote control do. Here is a rundown of the most important ones: Power: Turns your TV on or off

Volume: Adjusts the volume of your TV Channel: Changes the channel on your TV Mute: Silences your TV’s sound

Input: Selects the input source for your TV (e.g., HDMI 1, Component 2)

Conclusion

If you own a Samsung 65-inch TV, you may have noticed that the remote control doesn’t seem to work as well as it used to. There are a few things you can do to fix this problem. First, try replacing the batteries in the remote.

If that doesn’t work, you can try resetting the remote by holding down the power button for 10 seconds. If neither of these things works, you may need to buy a new remote from Samsung.

 

Editor - An aspiring Web Entrepreneur, Professional Blogger for over 9 years, SEO Specialist, Digital Marketing Expert, and avid Tech Geek. He loves to cover topics related to iOS, Tech News, and the latest tricks and tips floating over the Internet.