How to Install Blink Outdoor Camera on Brick

If you’re looking to add an extra layer of security to your home, consider installing a Blink outdoor camera on your brick exterior. With Blink’s easy-to-use app, you can keep an eye on your property from anywhere in the world. Plus, Blink’s battery-powered cameras are designed for easy installation, so you won’t need to hire a professional.

  • Find a level spot on the brick wall where you want to install the Blink Outdoor Camera
  • Using a drill, create two pilot holes in the brick at the chosen location
  • Affix the included mounting plate to the wall using screws and anchors appropriate for your specific wall type
  • Snap your Blink Outdoor Camera onto the mounting plate
  • Use the Blink app to complete the installation and setup of your new camera!

Can You Mount Blink Cameras on Brick?

Yes, Blink cameras can be mounted on brick. There are several ways to do this, and the best method will vary depending on the specific camera model and the type of brick wall. In general, though, it is possible to use either adhesive mounts or screw-in mounts to attach Blink cameras to brick walls.

Adhesive mounts are the easiest way to mount Blink cameras on brick walls. These mounts use a strong adhesive to adhere the camera base directly to the wall. Adhesive mounts are typically included with Blink cameras, and they can be found at most home improvement stores.

Screw-in mounts are another option for mounting Blink cameras on brick walls. To use these mounts, simply insert the provided screws into pilot holes in the wall and then screw the camera base into place. Screw-in mounts provide a more secure connection than adhesive mounts, but they can be more difficult to install.

How Do You Attach a Blink Camera to a Brick House?

If you’re looking to add a Blink camera to your home security system, and you have a brick house, there are a few things you’ll need to do.

First, find a spot where you want to mount the camera. Keep in mind that it will need to be close to an electrical outlet.

Once you have the location picked out, use a drill to create pilot holes for the screws. Then, use masonry anchors and screws to secure the Blink camera into place.

Finally, connect the Blink sync module to your router using an Ethernet cable.

Once everything is plugged in and turned on, your Blink camera will be up and running!

How Do You Mount an Outdoor Camera to Brick?

When it comes to mounting an outdoor camera to brick, there are a few things you need to take into consideration.

First, the weight of the camera will play a role in how you mount it. If the camera is too heavy, then simply screwing it into the brick may not be enough to keep it secure.

In this case, you may need to use special mounts that go both into the brick and around the back of the camera for added support. Another thing to consider is whether or not you want to drill into the brick. This will make for a more permanent installation, but it could also damage your bricks if not done correctly.

If you decide to drill, be sure to use masonry bits designed for drilling through brick and mortar.

Finally, pay attention to where you place your screws or nails when mounting – avoid placing them too close together as this could cause cracking. With these considerations in mind, follow these steps for mounting an outdoor camera onto brick:

  1. Begin by holding up the camera against the wall where you want it mounted and use a pencil or marker to make two small dots on the wall at either end of where the camera will sit; these will be your pilot holes.
  2. Using a hammer and masonry bit (or drill with a masonry bit attachment), carefully create pilot holes at each mark on the wall; tap gently so as not to break or chip away too much material from your bricks.
  3. Affix your chosen mount onto the back of your camera using screws or another method as directed by manufacturer instructions; some mounts come with adhesive strips instead.

How Do You Secure a Camera to Brick?

One of the most popular ways to secure a camera to a brick surface is to use industrial-strength velcro. This can be found at most hardware stores and will provide a very strong grip.

Another option is to use specialty screws and wall plugs designed for attaching cameras to masonry surfaces.

These are available from some electronics stores or online retailers.

How to Install Blink Outdoor Camera Without Screws

Are you looking for a way to install your Blink Outdoor Camera without having to use any screws? If so, then this blog post is for you! We will go over everything you need to know in order to install your Blink Outdoor Camera without the use of any screws.

First, let’s talk about what tools and materials you will need. For this project, you will need a power drill, a screwdriver, a hammer, and some nails. You will also need a level so that your camera is installed perfectly straight.

And of course, don’t forget the Blink Outdoor Camera itself! Now that we have all of our materials gathered, let’s get started on the installation process. The first thing you’ll want to do is find a suitable location for your camera.

Keep in mind that it needs to be close enough to an electrical outlet so that you can plug it in. Once you’ve found the perfect spot, use the power drill to create two pilot holes. These pilot holes should be big enough for the nails but not too big so that they are loose in the wall.

Next, take your hammer and drive the nails into the pilot holes until they are flush with the wall surface.

Now it’s time to attach your Blink Outdoor Camera using the provided mounting bracket. Simply line up the bracket with the nails and then use the screwdriver to tighten them down until secure.

At this point, all that’s left to do is plug in your camera and enjoy!


Assuming you would like a summary of the blog post titled “How to Install Blink Outdoor Camera on Brick”: The blog post explains how to install a Blink Outdoor Camera on a brick surface.

First, use the provided screws and wall plugs to secure the mounting plate to the brick.

Next, attach the camera to the plate using the provided thumbscrews. Finally, connect the camera to power using the included micro USB cable.

Raymond Williams is a technology writer that lived with computers all his life. He is an expert character that writes articles about Windows, Gaming, Android, and How To Fixes.