If you have a Samsung TV and want to control the volume with your DIRECTV remote, you can program the remote to do so.
- Turn on your TV and Directv remote
- Find the ‘Menu’ button on your remote and press it
- Go to ‘Settings’ and then find ‘Remote Control’
- Select the ‘Program Remote’ option and then choose your TV brand from the list
- Follow the prompts to program your remote control to operate your TV’s volume
How Do I Program My Directv Remote to Control My Samsung Tv?
If you have a Samsung TV and want to use your DIRECTV remote to control it, here’s how:1. Press and hold the MUTE and SELECT buttons on your remote until the green light under the DIRECTV logo blinks twice.
2. Enter 9-9-1 on your remote.
The green light should blink twice. 3. Aim your remote at your TV and press POWER once. The TV should turn off.
If not, try again from step 1.
How Do I Get My Directv Remote to Control My Tv Volume?
There are a few different ways to get your DIRECTV remote to control your TV volume. The first is to program the remote to your TV. To do this, you’ll need the model number of your TV and the DIRECTV remote code for your TV.
Once you have those, follow these steps:1. Press and hold the MUTE and SELECT buttons on your remote until the green light blinks twice.2. Enter 9-9-1 (the default code) followed by the four-digit code for your TV.
The green light will blink twice again.3. Press and release the VOLUME UP button on the remote. The green light should blink once more and then stay lit.
4. Test the volume buttons on your remote to make sure they’re controlling your TV’s volume as expected. If not, repeat steps 2-4 using a different code for your TV until you find one that works.If you can’t find a working code or would prefer not to bother with programming, there’s another way to get your DIRECTV remote to control your TV’s volume: use an RF extender kit like the ones from Radio Shack or Best Buy (around $30).
What is the Codes for a Samsung Tv for a Directv Remote?
There are a few different ways to program your DIRECTV remote to control your Samsung TV. Here are the codes and instructions you’ll need.If you have a Samsung TV with the model number ending in “C” or “D,” you can use the following code: 0004.
To enter this code, press and hold the MUTE and SELECT buttons simultaneously for three seconds. The light on your remote should blink twice. If it doesn’t, try again with another code until you find one that works.
If your Samsung TV model ends in “K” or “M,” use this code instead: 0010. Entering this code is similar to the first method – just press and hold MUTE and SELECT at the same time for three seconds. The light on your remote should blink twice if it’s entered correctly.
Finally, if you have a newer Samsung TV (model numbers ending in “N” or higher), use this code: 0101. As before, press and hold both MUTE and SELECT for three seconds, then check for a blinking light on your remote to confirm that it was entered correctly.Once you’ve found the right code for your TV model, simply point your remote at the TV and press POWER to see if it turns on/off successfully.
If not, keep trying different codes until you find one that works!
How Do I Connect My Directv to My Samsung Tv?
If you have a DirecTV receiver and a Samsung TV, you can connect the two devices using an HDMI cable. First, make sure that your DirecTV receiver is turned on and that your TV is set to the correct input. Then, connect one end of the HDMI cable to the “HDMI OUT” port on the back of the DirecTV receiver.
Next, connect the other end of the cable to any open HDMI port on your Samsung TV. Once everything is connected, you should see a picture on your TV screen.
How to Program Directv Remote to Tv
If you have a DirecTV remote and want to know how to program it to your TV, here are the steps:1. On your remote, find the “Mode” button. This is usually located near the top of the remote.
2. Press and hold the “Mode” button until the red light on your remote blinks twice. This means that your remote is in TV mode.3. Use the arrow keys on your remote to navigate to the “Setup” menu option and press “Select”.
4. In the Setup menu, select “Remote or Devices”. Then select “Program Remote”. You will see a list of options for what you can program your DirecTV remote to control.
Select “TV”. If you have more than one TV in your home, you will be prompted to choose which TV you would like to control with this remote before moving on to step 5.5a.
For newer TVs (2016 models and beyond), follow these instructions: Turn on your TV and make sure that it is set to input #1 (usually done by pressing the “Input” or “Source” button on your TV’s remote). On some TVs, this may say “HDMI 1” instead of just plain “input 1” – that’s okay! Just make sure whichever number is listed first is selected.
. Now look at your DirecTV remote and find the key labeled “AT&T/Devices.” Press and hold this key until all four mode lights at the top of your DirecTV Remote blink red twice then stay lit.
. Enter 9-9-1 using the number keys at he bottom of your DirecTV Remote (do not use channel up/down). The mode lights should now blink green twice.. Pointing your DirecTV Remote at your TV, press CH+ repeatedly until your television turns off.. Once off, press SELECT –the light above SELECT should now be solid green.. If successful , all four mode lights should now be solid green; if not successful repeat from Step 5a.. Your DirecTV Remote is now successfully programmed!
In this blog post, the author provides step-by-step instructions on how to program a DIRECTV remote to a Samsung TV. First, the user must put the remote in TV mode by pressing the MODE button until the light at the top of the remote changes from red to green. Next, use the arrow keys to highlight Settings and press SELECT.
Then, scroll down to Remote Control and press SELECT again. After that, scroll down to Volume Lock and make sure it is set to Off. Finally, use the up and down arrow keys on the remote to adjust the volume.